Thermaltake Litepower 750W
The Thermaltake Litepower 550W, 650W and 750W are specifically targeting energy efficient PC systems with lower overall power consumption in application fields, office and entertainment computers. The Litepower Series comply to the latest ATX 12V V2.3 Standard for utmost reliability and compatibility supporting state-of-the-art Intel and AMD processor and graphics technologies. With Over Voltage, Over Power and Short-Circuit protection the Litepower series offers industry grade protection. The Thermaltake Litepower series now offers you all these characteristics.
Ultra Quiet Fan
Large 120mm cooling fan delivers cool performance and silent operation.
Elongated Cable
The longer cables enable enthusiasts and power users to properly route the cables in optimal location to prevent airflow blockage. Significantly improving computer system’s overall thermal efficiency, as well as the aesthetic.
Utmost Reliability and Compatibility
The Litepower Series comply to the latest ATX 12V V2.3 Standard for utmost reliability and compatibility supporting state-of-the-art Intel and AMD processor and graphics technologies.
Massive and Dedicated +12V Output
Litepower 750W is equipped with dual powerful +12V rail, please see the output specification on the left hand side:
| AC INPUT |
Input Voltage: 230Vac |
|||||
| DC OUTPUT | +3.3V | +5V | +12V1 | +12V2 | -12v | +5Vsb |
| Max Output Current | 20A | 20A | 26A | 26A | 0.5A | 3A |
| Max Output Power | 150W | 610W | 6W | 15W | ||
| The +3.3V & +5V & +12V1 & +12V2 ocmbined output power shall not exceed 729W. | ||||||
| P/N | LT-750P |
|---|---|
| watts | 750W |
| RGB Fan | No |
| Form Factor | ATX |
| Model | LT-750AL2NL |
| Type | ATX 12V 2.3 |
| Max. Output Capacity | 750W |
| Color | Black |
| PFC (Power Factor Correction) | LT-750P W/Active PFC |
| Power Good Signal | “Power Good” signal rise time is within 10ms. |
| Hold Up Time | Upon the loss of AC input power, the output shall remain within regulation under maximum load and at nominal input voltage for minimum of 17 ms after the last current pulse drawn from the line. |
| Input Current | 8A |
| Input Frequency Range | 50Hz |
| Input Voltage | 230Vac |
| Operating Temperature | 5℃ ~ +40℃ |
| Operating Humidity | 5% to 85% relative humidity(non-condensing) |
| Storage Temperature | -20℃~+70℃ |
| Storage Humidity | To 95% relative humidity |
| Efficiency | 70% typical at nominal line, maximum load. |
| MTBF | 100,000 hrs minimum |
| Safety Approval | TUV, CE, GOST |
| PCI-E 6+2pin | 6+2pin PCI-E Connector x 2 |
